What Base Does a Garden Shed Need? Concrete, Slabs, Timber or Plastic Grid

Base for garden shed comparing concrete, paving slabs, treated timber frames and gravel-filled plastic grids.

A garden shed needs a base that is level, firm, drains freely and matches the size of the building’s floor frame. Concrete, paving slabs on a compacted sub-base, a treated timber frame and a gravel-filled plastic grid can all do that job. The right choice of base for garden shed, summerhouse and workshop buildings depends on the building’s size and weight and the ground underneath.

What makes a good base for a garden shed?

Four tests decide whether a base will last:

  • Level. A floor frame that sits out of level twists, and doors and windows start to bind.
  • Firm. Turf and soft topsoil come out, and compacted hardcore goes in, so the base cannot settle unevenly.
  • Drains. A gravel layer beneath the base and a slight fall away from the shed stop water sitting under it (MyBuilder shed base guide).
  • Sized to the floor. Too small and the floor edges are unsupported; too large and rain collects against the walls.

Bare grass or soil fails the first three tests, so every option below starts by digging out.

Choosing a base for garden shed buildings: the four options compared

Base typeBest suited toGround preparationWhat shortens its lifeDIY difficulty
Concrete slabLarger, heavier buildings such as workshopsDig out, compact hardcore, build formwork, pour and cureCracking on poorly compacted or shrinking clay; no fall, so water sits at the wallsHardest
Paving slabs on a sub-baseSmall to medium sheds and summerhouses on firm groundDig out about 150 mm, compact about 75 mm of hardcore, bed and level each slabSlabs rocking or sinking where the sub-base was not compactedModerate
Treated timber frameSmall, lighter sheds; gently sloping sitesLevel pads or blocks under a pressure-treated frameRot where timber sits in wet soil without ground-contact treatmentModerate
Plastic grid filled with gravelSmall to medium sheds, damp spots and gardens with no side accessClear, level and compact, then clip and fill the gridsGrids laid straight onto soft soil, which then settles unevenlyEasiest

Concrete slab

A concrete base for a shed is the most permanent option and the one to choose for a heavy workshop. When a homeowner asked tradespeople on MyJobQuote in June 2026 how thick a shed base should be, answers ranged from 80 mm to 200 mm. The most common minimum was 100 mm, and 150 mm was the usual recommendation for a standard shed, laid on 75 mm to 150 mm of compacted hardcore. Several suggested steel mesh or other reinforcement in the slab. Let the slab cure for at least a week before the building goes on (MyBuilder).

Wet cement is highly alkaline and can cause serious burns if trapped against the skin, so the Health and Safety Executive advises waterproof gloves that are long or tight at the wrist, and washing cement off skin straight away.

Paving slabs on a sub-base

Slabs can be lifted and relaid if the ground moves. A typical method is to excavate about 150 mm, lay and compact about 75 mm of gravel or hardcore, then lay the slabs with small gaps, checking each one with a spirit level and fixing them with a dry sand and cement mix (MyBuilder).

Treated timber frame

A frame of pressure-treated timber raised on concrete blocks or ground screws lifts the floor clear of the ground and lets air move underneath (MyBuilder). Decking framework timbers or railway sleepers can form the frame, as our guide to choosing a shed, summerhouse or workshop explains.

Check the treatment grade. Under BS 8417, Use Class 3 covers wood outdoors but out of soil contact, and Use Class 4 covers wood in permanent contact with the ground; timber in permanent ground contact must reach Use Class 4 protection (LABC). So any part of the frame that touches soil needs Use Class 4 timber.

Plastic grid filled with gravel

Interlocking grids, often made from recycled plastic, clip together and are filled with gravel (MyBuilder). They are light to carry through a house where there is no side access. A grid spreads the load but does not level soft ground, so it still needs a cleared, level and compacted layer underneath.

How big should a shed base be?

Measure the building’s floor frame, not the roof, which overhangs the walls. Then:

  • Mark out the area with pegs and string slightly larger than the floor (MyBuilder), so there is room to set the building square.
  • Avoid a wide hard apron beyond the walls. A hard surface sticking out past the cladding catches roof run-off and splashes it back onto the bottom boards.
  • If the base has to extend, give the exposed edge a slight fall away from the building.

Worked example: materials for an 8ft x 6ft shed

An 8ft x 6ft floor is about 2.44 m x 1.83 m. Adding 50 mm on each side for setting out gives a base of 2.54 m x 1.93 m, or 4.90 m². Multiply the area by the depth of each layer:

LayerDepthCompacted or finished volume
Hardcore sub-base75 mm0.37 m³
Hardcore sub-base150 mm0.74 m³
Concrete slab100 mm0.49 m³
Concrete slab150 mm0.74 m³

These are estimated finished volumes. Loose hardcore loses volume when compacted, so order with a margin and ask your supplier to check quantities against your exact base.

Clay ground, trees and drainage

Clay soils absorb water and swell when wet, then shrink as they dry. The British Geological Survey says this movement happens mainly in the upper two metres of the ground and is driven by rainfall, drainage and vegetation, particularly the growth or removal of trees. The sign is ground that cracks in summer and turns heavy in winter.

A rigid concrete slab on shrinking clay can crack, while slabs, grids and timber frames can be re-levelled if the ground moves. For a big building, the ground matters more: one respondent on MyJobQuote advised consulting a structural engineer where the subsoil is clay and vegetation grows close by.

To find out what is under your garden, Tendring District Council points residents to the British Geological Survey’s digital map, which can be searched by postcode as a rough guide to the subsoil.

Before you dig, avoid hollows where puddles stand after rain, plan a fall away from the house and neighbouring fences, and keep soil and planting off the base edge so the bottom boards can dry out.

How to lay a shed base: the order of work

  1. Get the floor dimensions and any base requirements from the building’s own instructions before you dig.
  2. Check the planning position (see below).
  3. Mark out with pegs and string, and check the diagonals are equal so the base is square.
  4. Remove turf and topsoil. For concrete, guidance suggests excavating about 100 mm to 150 mm (MyBuilder).
  5. Spread and compact the hardcore to the depth your chosen base needs.
  6. Build the base.
  7. Check level in both directions.
  8. Let concrete cure for at least a week before the building goes on.

Does a shed base need planning permission?

In England, most sheds and summerhouses are permitted development under Class E of Schedule 2, Part 1 of the Town and Country Planning (General Permitted Development) (England) Order 2015, as long as the building meets these limits from the government technical guidance:

  • Single storey, with eaves no higher than 2.5 m.
  • No higher than 2.5 m if it is within 2 m of a boundary; otherwise no higher than 4 m with a dual-pitched roof or 3 m with any other roof.
  • Not forward of the principal elevation of the original house.
  • Together with other outbuildings, it covers no more than half the land around the original house.
  • Not within the grounds of a listed building.

The base itself matters in one case. Class E does not cover a raised platform, which the guidance defines as a platform more than 0.3 m high. If building up a sloping site would lift the base above 0.3 m, ask the council before you start.

Building regulations do not apply to a detached single-storey building of up to 15 m² with no sleeping accommodation. Up to 30 m² is also exempt if the building is at least 1 m from the boundary or built substantially of non-combustible material (Building Regulations 2010, Schedule 2, Class 6).

Different rules apply to flats, on designated land such as conservation areas and where permitted development rights have been removed. This is general information for England, not legal advice; if unsure, check with Tendring District Council planning before you order.

Frequently asked questions

Can a shed sit directly on gravel?

Not on loose gravel alone. Loose stone moves under point loads, and the floor drifts out of level. Compacted hardcore with a timber frame or a plastic grid on top holds the gravel in place and makes a sound base for a small shed.

What is the cheapest shed base?

A treated timber frame or a plastic grid usually uses the least material, because neither needs a full concrete pour. Concrete costs the most in materials and effort.

Planning a new shed, summerhouse or workshop?

Bentley Fencing Supplies, based in Weeley near Clacton-on-Sea, supplies garden sheds and summerhouses, workshops and garages and aggregates, cement and post mix for the base, with delivery across Clacton, Colchester, Chelmsford and the surrounding areas. Call us on 01255 830820 or ask for a free quote online.